Super Storage

Space is in short supply in my tiny house. And, anyone with kids knows that small spaces become even smaller when little ones leave their mark.

So, the decision to move our daughter into our tiniest of three bedrooms (8 x 9 - yes, that's tiny!) was made to make way for a new den/playroom upstairs. In order to move her twin bed into the new space we had to sacrifice the closest by ripping it out (pictures to come).



Eden's new storage plan starts with two cubby units (purple, of course!). The plan is to build a third unit that will fit in the corner and stand tall enough to house hanging items. The door will be a half-door that will swing out above the smaller right-hand cubby unit.

Now, I like my furniture to pull double duty - and, this piece is no different. So, I'm sewing up upholstered cushions that will lay on top of each unit. The longer of the two units also has a little desk that sits on a rail-type system. This way Eden can use the space as a little reading nook.


I'm excited to see what the green fabric will look like with the unit. I think it will be fun and bright. It should go nicely with Eden's new duvet cover.

The room is coming together!!

Seriously. It's a salad bowl. DIY Challenge - #2.

I needed a fun - but somewhat inconspicuous - light shade to finish off my daughter's new room. Other requirements included ridiculously easy and inexpensive. So, why not a salad bowl shade?

To start, you need the remnants of this type of ugly ceiling light. Take off the glass shade and you're left with a threaded rod that attaches to the base.

Here's what you'll need:

• $10 clear plastic bowl with roughly the same dimensions as the shade you removed (mine is PC brand)
• round coding stickers from an office supply store
• a drill and 3/8" drill bit (same size as the threaded rod)
• white spray paint
• saran wrap, or some way to cover the outside of the bowl when spraying

Step 1 - Drill a hole.
Using your 3/8" drill bit, slowly drill a hole straight through the bottom of the bowl - dead centre.

Your threaded rod should slip right in. If not, make the hole slightly larger by shaving around holes edge with your drill (wiggle the rotating bit around the edge).

Step 2 - Stickers.
Use your stickers to make a pattern. I went with random dots.


Step 3 - Saran Wrap.
You only want to spray the inside of the bowl, so cover the outside of the bowl with saran wrap to protect it from getting sprayed.


Step 4 - Spray.
Light coats.



Step 5 - Peel off the stickers.
Peel before the paint completely dries (before it dries as one piece!).

Step 6 - Attach to ceiling.
Slip the rod through the bowl and attach to ceiling fixture.

DIY Lighting - Challenge #1

I woke up one morning last week and, amazingly for the first time, admitted the light fixture in my bedroom is super ugly. Which led me to look around and let sink in that all of the lighting fixtures in my house are super ugly. So, new challenge – DIY myself some cool lighting.

My first DIY light is a small pendant light for my little ones bedroom renovation. I’ve been pining over the very lovely Swarovski Schonbeck pendant light for a while now. But, with a hefty price tag of just over $1,400, the closest I’m going to get is a DIY knockoff.

For some reason I have been carting around an old wrought iron planting pot hanger for years. It was one of those “it could be good for something someday” things (my collection of things drives my husband crazy!). But, couple the pot hanger with a $5 IKEA Hemma cord set and you’ve got yourself a frame for a light.

I made and tied on a slew of beaded strings around the frame of the hanger for shimmer. The colour choices match the bedroom’s new fabric.

To hide the string ties I then wrapped the whole frame with a thin turquoise ribbon.

I still have a few finishing touches to take care of – including tracking down a tin snip to get rid of the extra chain, evening out the beads and installing the light above E's new bed.

So, while I’m not going to be showing off this light fixture at any glamorous exhibits, it does the trick.

Featured on ohdeedoh.com

Back to blogging - A duvet cover

I have a three year-old with an insatiable appetite for the colour purple. Now, I like purple - but not in the espresso hit that she does. Luckily, I found a fabric that fills the purple need for her while giving me a little relief from all purple/all the time.

Using the fabric as a starting point, we’ve painted the room and made a few “designer” decisions (stay tuned).

My project this weekend was sewing the duvet cover. I used the designer fabric for the top, and decided on a purple and white polka dot fabric for the underside (originally a dress fabric, but it works!). All in all, this was a pretty easy project. It was literally sewing two pieces of fabric together. Remembering to make a slit in the side for the duvet.

I decided to add in a bright green piping. I thank Lenee Alexander over at ehow.com for teaching me how to sew piping! Nothing like propping the laptop up beside the sewing machine!

Website

www.carolynclegg.com

the beginnings of a home office desk

i'm working on turning our one spare bedroom into a home office/playroom/guest bedroom. a little lofty, considering the room is only 9' x 11'! my first project is building myself a little desk that can be tucked away when eden and i need some room to play. so, how about a desk that swivels?

i'm building a desk that is made up of two 12" x 48" x 6" tabletops that sit on top of a small storage unit. the storage unit rests against the wall and the two tabletops are parallel to the wall.

when i want to use the desk i swivel the two tabletops to meet and lock them together.

i have the table tops made. i just have to see if the way i imagine the tabletops swiveling will actually work. i can't have them scraping against each other when they swivel. i'll show you what i've come up with next week!

idon storage shelf

i know, i know....i took a little two week hiatus. i was busy building this....




this is my idon shelf (finally something named after my husband - he's been waiting awhile!). idon is an acronym for idea icon. this shelf is three rotating cubes within three cubbies. each cube is 6" x 6". i painted a different design on each of the sides and back to match up as you rotate the cube.


it funny how after you build something you think about how simple it was and what took so long?!